Architectural asphalt shingle roofs installed to the manufacturer’s high-wind spec — the most affordable way to put a solid new roof over your South Florida home.
Shingle Roofing
Asphalt shingle is the most budget-friendly roof you can put on, and today’s architectural shingles are a long way from the flat 3-tab roofs people picture. They’re thicker, dimensional, and carry high wind ratings when they’re installed correctly.
The catch with shingle is that it’s only as good as the install. The nailing pattern, the starter and cap courses, the underlayment, and the flashing all have to be right, or the wind finds the weak spot. We install to the manufacturer’s high-wind specification so the wind rating — and the warranty — actually mean something.
Shingle also goes on faster than tile or metal, so most homes are finished in a few days with less disruption. It’s a smart choice for a first roof, a rental, a tighter budget, or matching an HOA’s required look.
Time for new shingles?
Shingles show their age more visibly than tile or metal. Here’s what to look for from the ground and in the attic.
Shingles shed their protective granules as they age. Heavy grit in the gutters means the shingles are wearing thin.
Edges that curl up or shingles that crack in the sun are at the end of their life and let wind get underneath.
After a storm, missing tabs or shingles with a crease across them have been lifted by wind and no longer seal.
Areas where granules are gone look darker or smooth — that asphalt is now exposed to the sun.
Most architectural shingle roofs in our climate wear out in this range. Planning ahead beats an emergency.
Water stains inside usually mean the shingles or flashing are no longer keeping water out.
What we do
Full tear-off, deck repair, new underlayment and flashing, and architectural shingles installed to high-wind spec.
Replacing missing and damaged shingles, resealing lifted tabs, and fixing flashing around vents and walls.
Ready for a longer-lasting roof? We handle full conversions from shingle to tile or standing-seam metal.
| Architectural | 3-tab | |
|---|---|---|
| Thickness | Thicker, layered | Single thin layer |
| Wind ratings | Higher | Lower |
| Typical lifespan | 20–30 years | 15–20 years |
| Look | Dimensional, textured | Flat, uniform |
| What we install | Yes — almost always | Rarely |
What to expect
We check the shingles, deck, and ventilation, and give you a clear written quote.
We pull the permit and help you choose a shingle line and color.
We strip to the deck, replace any bad wood, and install underlayment, starter, and flashing.
We install shingles to high-wind spec, cap the ridges, pass inspection, and clean up.
Why Hunter
A shingle roof installed to spec holds up well in our storms. One installed carelessly fails the first time the wind gets under an edge. The difference is the crew.
Nail count and placement follow the manufacturer’s high-wind spec — the step that decides whether shingles stay put.
Shingles cook in a poorly vented attic. We check intake and exhaust so your roof isn’t aging from below.
We protect your landscaping, magnet-sweep for nails, and haul away the old roof.
Good questions
Still wondering about something? Call us at (561) 468-5550 — real answers, no sales pitch.
An architectural asphalt shingle roof typically lasts around 20 to 30 years here, depending on the product, ventilation, and how much sun and weather it takes. That’s a shorter life than tile or metal, in exchange for a lower upfront cost.
Modern architectural shingles carry high wind ratings — but the rating only holds if they’re installed to the manufacturer’s high-wind spec, with the right nailing pattern and detailing. That install is where we don’t cut corners.
3-tab is the old flat, uniform shingle. Architectural (dimensional) shingles are thicker, layered, and carry higher wind ratings and a longer life. We install architectural shingles for almost every home.
Yes — shingle is the most affordable of the three to install. Tile and metal cost more upfront but last longer, so the right choice depends on your budget and how long you plan to be in the home.
Most homes are done in a few days, weather permitting — faster than tile or metal. We give you a realistic window up front.
We don’t recommend it. Roofing over old shingles hides the condition of the deck, adds weight, and shortens the new roof’s life. We tear off to the deck so we can check the wood and start clean.
A hot, poorly vented attic bakes shingles from underneath and shortens their life. Balanced intake and exhaust ventilation keeps the roof deck cooler and drier.
Many do, and many specify colors. We can work with your HOA’s requirements and help with the color selection they approve.
What homeowners say
Hunter Construction replaced the roof on our home. It’s great to work with a small business that makes you feel at home — I’ve found my roofing contractor in Palm Beach County.
Very professional. Wouldn’t go with anyone else — they’ll treat you right.
I’ve sold roofs for numerous companies all over, and I’ll always recommend Hunter Construction for commercial and residential work.
Related services
Where we work
Based in Jupiter and working throughout the Treasure Coast and the Palm Beaches. If your home or building is in one of these areas, we can get out to take a look.
Book a free inspection and get a clear quote for a wind-rated shingle roof.
